Satun - General Info

Select your download option below


Description:

Satun is a major fishing port and is the gateway to Thailand’s southern-most islands in the Andaman Sea. 

It is located close to the Malaysian border and offers a daily ferry service between Satun and Langkawi. As Langkawi is a common arrival/departure point, international travelers can fly into Malaysia and travel by ferry into Thailand, allowing you to avoid clearing in and out of Thailand and Malaysia multiple times to receive guests. 

Satun is a port of entry, however, if choosing to clear in or out here be aware that the logistics can be somewhat complex due to restricted mobility at low tide and sporadic navigation marks for the approach.

Entrance Notes or Cautions:

Entry into the river is tidal. The channel is well marked; follow the buoyed channel up the river to the concrete government dock. Red and green buoys and white markings are permanent, however shifting shallows (no-go zones) are not marked on the charts but the site is often marked with bamboo sticks. The river is reasonably wide but the western shore is a very gradual slope and is shallow. 

There is a lot of floating debris (trees, ropes, nets, etc.) and night fishing operations in the area, so traveling at night is best avoided.

While the position below is for the river entrance, cruisers have reported that a more flexible approach, allowing passage even at fairly low tide, is from the south generally following the path the Langkawi-Satun ferry takes. See useful entrance notes at this report from 2019. On the way out, it is helpful to follow your recorded inbound GPS track.

Position:  

06° 33.97’N, 99° 57.58’E (River entrance)

Read and Post Related Comments

If you have information for this section, or feedback on businesses used, please let us know at [email protected]. We also welcome new information about businesses you have used (see Related Businesses).


Select your download option below


Next Section: Profile: Clearance

Satun was last updated 1 year ago.

Related to following destinations: ,


YachtFlags.com provides high quality courtesy flags that are manufactured in durable Knitted Polyester fabric. Knitted so that the fabric itself does not deteriorate in the constant movement that marine flags are usually exposed to, and polyester so that the flag does not weaken in the strong UV-light usually found in the main sailing areas of the world.

YachtFlags.com offers a discount to Noonsite members.

Use the coupon code NOONSITE_5A2B when checking out to get 10% off today.

Buy Now On YachtFlags.com

YachtFlags.com provides high quality courtesy flags that are manufactured in durable Knitted Polyester fabric. Knitted so that the fabric itself does not deteriorate in the constant movement that marine flags are usually exposed to, and polyester so that the flag does not weaken in the strong UV-light usually found in the main sailing areas of the world.

YachtFlags.com offers a discount to Noonsite members.

Use the coupon code NOONSITE_5A2B when checking out to get 10% off today.

Buy Now On YachtFlags.com

You must Login or Register to submit comments.

  1. January 3, 2019 at 6:47 AM
    Data Entry2 says:

    We anchored in Satun to clear in. The clear in process went fine, but we did get stuck in the mud in the river. The western shore is a very gradual slope, and I’d recommend boat anchor in the middle of the river, despite the traffic of local boats. The ferries don’t go far into the river, so ferry wake wasn’t a problem.

    We hauled out at PSS. In advance, we told the staff (Julie, via email) that we were hauling out for three days only, and had some fibreglass work that needed to be done above the waterline. Julie said no problem.

    The haul out is via a rail system, which is very jerky. There was a lot of banging down below us, but we couldn’t see what was going on. When I got down off the boat, I pointed out to the yard staff that they were damaging our bottom paint. Untold me it would be no problem because they’d fix it when they did our bottom job. I told him we weren’t doing a bottom job. Un then had all the supports redone with padding to protect the bottom.

    We got our project done in time and when we started asking about the launch, the staff told us they couldn’t launch us for another week (10 days total) because of the tide. News to us! PSS has a very limited window for hauling and launching the boats, not only because of the rail but also because the river shallows at the mouth and boats get stuck trying to come and go.

    Julie was very apologetic to us and set us up in a hotel. She coordinated a car or ride for us to get to and from the yard and kept in touch with recommendations for the area.

    We never did get the fibreglass repair done, as they eventually told us they didn’t have the proper gel coat to do it. While we had time twiddling our thumbs, we did get the yard to apply Propspeed for us.

    Most of the boats hauled out are local commercial boats – fishermen or tours. There are a handful of cruisers there, most of them for long term work – months spent at PSS. The yard is bare bones – the first three nights we stayed in the yard we were the only ones sleeping onboard. Everyone else rents a room across the way.

    Be sure to clear out with the Harbourmaster in Satun before you head north.

  2. June 11, 2018 at 9:42 AM
    Data Entry2 says:

    I hauled out my Najad 390 at PSS In February 2018.
    There were many negative reports circulating in the cruising community prior to my haul out so I decided to visit the yard before I committed to a lift out there.

    My previous experiences at the yard were positive. Whilst its primary function is the haul out and servicing of the huge Thai and Malaysian fishing fleet, the yard also caters for yachts with special yacht cradles available for fin keeled boats.

    On my visit, I spoke with Julie, Un and Michael and felt reassured about the haul out and I booked to lift on the next appropriate tide. When I had hauled out there in previous times, the yard was chock full of both fishing boats and yachts. This year, there were a handful of yachts and just a few fishing boats.

    The lack of yachts was largely due to the negative reports doing the rounds amongst the yachting community and the purpose of this review is to report my experience there fairly.
    My haul out needs this year were fairly simple but my experience at the yard was a positive one. I was in the yard just for 8 days which was my target.

    The work was done to a good standard and whilst I never enjoy the boatyard experience, it was as good as it can be.

    So I would like to say that PSS is certainly welcoming private yachts and I would recommend the yard to anyone thinking of going there. They carry out good work and are competitively priced in the region.

    Ignore the rumours, they are simply false. I would not hesitate to lift out there again in the future.

  3. January 27, 2018 at 8:15 AM
    Data Entry2 says:

    I would like to endorse what hvVega said about PSS at Chebilang, Satun. I have brought my boat (Sade) here for two biennial haul outs and one other visit – which involved fabrication and installation of SS davits for my RIB – and I will keep coming back because I believe PSS is excellent value for money.

    Sure, it can be dirty and dusty with servicing the fishing fleet (its bread and butter work) but I can put up with that. Yes, Jia and Julie’s absence has been a blow, but it is also great to see Un and Michael step up to fill that huge hole.

    I have just had Sade hauled out for a bottom clean, topside polishing, upgrades to two aft cabins and some mechanical and electrical repairs. The work was carried out and completed ahead of the 10 days (4/1/18 – 14/1/18) that I told Un and Michael that I had to spare.

    Things are much quieter here compared to the same time two years ago. The benefit, of course, is that I had access to the best trades and there was zero waiting time. I am disappointed to hear some negative comments from various sources but thought I would share my most recent experience so you can all make a better-informed decision where you go for your next haul out.

    Make sure you obtain a letter of confirmation of your boat being at PSS for repairs from the office before you clear in with Customs, to avoid an 800B fee from Customs. Hang on to a copy as Customs will try the same at Clearing Out and do avoid going in during weekends and public hols, as they charge a hefty 1000B compared to 200B.
    Happy and safe sailing,
    Ed

  4. August 15, 2017 at 8:02 AM
    Data Entry2 says:

    We have been using PSS shipyard in Satun, Thailand for several years now. The prices are reasonable and we have always been quite pleased with the team and their work. That said, they recently suffered many problems when their young dynamic manager Jia had a severe stroke. This threw the yard into temporary chaos which has since been more or less solved.

    Most of the problems people experience stem from communication difficulties. When we were last there Michael, whose English and Thai are superb, was a great help – although he was usually up to his ears sandblasting a yacht whose owners were never satisfied.

    We have seen some wonderful first-class work come out of PSS, just have a look at what was done on superyacht Cariad for an example. There are two levels of workers there, with different skill and pay scales, so you must decide which you need for your jobs. Obviously, the ones who turn out five-star work are more expensive. Asking the fishing boat workers, who are less expensive, for fine yacht work rarely pays off to satisfaction. The machine shop does lovely work, although they do attend to the commercial fishing boats, who are usually well-known repeat customers, first. That said, by giving them the jobs you need doing early you will most likely not even notice the difference.

    We like the place and the friends we have there, so, if you do decide to haul out at PSS do not be surprised if you find Vega high and dry in the midst of our annual haul out.
    Others have commented on the toilets and showers as well as the apartments that are available.
    The river entrance may look daunting but is actually quite OK if you faithfully follow the waypoints. Be sure to go in on the tail of a rising tide… just in case!

  5. June 20, 2017 at 4:39 PM
    Data Entry2 says:

    Posted on behalf of SY Kiwi Blue:

    We were in PSS Shipyard from late January until mid-May 2017 for a sandblasting job that should take a maximum period of 6 weeks. We were there for 3.5 months.
    Work was promised but always delayed and every morning you had to compete with other yachties to get people working on your yacht.

    The management situation in the yard has changed dramatically since Jia had a stroke. There is hardly any qualified labour available so quite a few jobs had to be done twice which adds to the length of stay in the yard. The commercial fishing boats have priority and they bring their own maintenance crew. We were on a side track for 3 weeks without any work done because of the priority of the fishing boats.

    When you come in for a small antifoul job, you might be OK, but for sandblasting or another big job we would not recommend this yard.

    Gert and Mies Harbers
    Kiwi Blue

  6. December 15, 2016 at 6:22 PM
    Data Entry2 says:

    Update 9 December from Ian Gower:

    We checked in yesterday at Koh Lipe and no fees were mentioned – no agents in sight. The one Immigration officer gave us about 5 forms to fill in and asked us to be patient as he had an incoming ferry to process, took about an hour.

    He checked details, passports, boat registration and last port check out papers required.
    No stamp in the passport – we received instead a document signed & stamped by the Immigration officer with permission to stay 30 days, captain and crew.

    Not sure yet if we keep that as proof at next port, but I have made a copy.

  7. December 9, 2016 at 1:07 PM
    Data Entry2 says:

    Koh Lipe: New Clearance charges for yachts
    Reported 26 November 2016

    Latest charges being imposed at Ko Lipe – closest island to Langkawi Malaysia.
    Check-in: 1000 Baht
    Check-out and port clearance: 2500 Baht
    Visa on arrival: 2000 Baht per person
    Service charge: 500 Baht per person
    Photo service: 200 Baht per person
    Thai currency only – non-refundable

    Charges listed are about 10 times the normal fee as charged at check-in at Phuket.

    Update 30 November 2016
    Last weekend we did hear someone had been arrested for excessive charging as an illegal agent, working in conjunction with immigration. Apparently, Immigration was sending yachties to an agent before they would check them in. Anyway, friends arrived, got sent to an agent by Immigration, who tried to charge huge fees plus a fine as they said he took too long to arrive from Langkawi. The skipper refused after an argument and he lodged a complaint with the Police. However, Immigration then refused to stamp him in or out (but did say if you come back early tomorrow we will check you in for half price).

    They said there was a new rule with Malaysia, the Captain does not need a stamp in his Passport. Such crazy stuff.

    Fortunately, when they came back to Langkawi, the Malaysian Immigration stamped him back in and said they have no contact or dealings with the Ko Lipe officials.

    Good news – the most recent contact who sailed over to Ko Lipe was checked incorrectly – no fees. Apparently, there were 3 people pretending to be agents in cahoots with Immigration. Speed boat tour operators. The Police did tell our friends they would deal with the man concerned.

    A group of us are heading that way in about a week, so will let you know what transpires.

  8. September 3, 2013 at 11:23 AM
    Data Entry2 says:

    I have been bringing my boat here for 7 years and over that time the quality of the workmanship has increased many folds from the yard attracting large yachts for full reconstruction mainly by the recently retired Captain Des. Lots of good workmen as long as you give them adequate instruction, diagrams and encouragement.

    Good luck make sure you keep a daily log of events people work on the boat, if they guys get taken off the boat for other urgent work make sure you document it as sometimes things are missed in the paperwork system its in Thai so you have a devil sorting it out, We asked for a Bill fortnightly and got it on time. Engineering shop is very good, but they like to line up the motors and shafts in the water like they do in a fishing boat. Good luck

Click to access the login or register cheese